•  

      

     
ring_wave_generator
Ring Wave Generator
  • Product class: Products EMC&EMI Test System
  • Product describe:Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45
  • Ring Wave Generator ((RWG-4K16)

    1. Introduction

    Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45.Ring wave generator is used for the simulating electrical network, the power supply of the reactive load the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. It is widely used in electronic equipment. 


    2. Parameters

    Model RWG-4K16
    Voltage Oscillation frequency (open)  100kHz±10%
    Output voltage(open)  250V~4000V)±10%
    Frontier(open circuit voltage,T1,10%~90%)  0.5μs±30%
    Frontier(short circuit voltage,T2,10%~90%)  0.9μs
    Short circuit current at 3500V(PK1)  292A±10% @12Ω
     117A±10%@30Ω
    Interval  1s~99s
    Impulse times  1~9999times
    Output mode  Positive, negative, positive/negative auto
    Output Impedance  12Ω,30Ω
    Phrase  asynchronous, synchronous
    Coupling and decoupling network(CDN)  16A single Phrase or 20A 2 phases/5 wires


    3. Relative products

    IEC61000-4-2 Electrostatic discharge generator    ● IEC61000-4-5 Surge generator
    IEC61000-4-4 EFT immunity measurement     ● IEC61000-4-11 Voltage dips and short interruption generator    
    CISPR16-1 EMI test system