•  

      

     
pendulum_impact_hammer
IK07-IK10 Pendulum Impact Hammer
  • Product class: Products Environment Test Chamber
  • Product describe:This device is designed according to IEC60068-2-75-1997 and IEC62262
  • IK07-IK10 Pendulum Impact Hammer

    1. Introduction:
    This device is designed according to IEC60068-2-75-1997 and IEC62262, and can meet the test requirements of IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal for mechanical impact testing. The device can be adjusted back and forward, left and right, and the angle also can be adjusted. 

    2. Specification
    ●Angle: 0~900 adjustable
    ●Length of swing rod: 1000mm
    ●Impact hammers: 1.7kg, 5kg, 5kg, 10kg steel hammers with swing rods
    ●Impact height: 200~1200mm adjustable
    ●Impact energy: 5J, 10J, 20J, 50J

    Impact energy(J) 0.2 5 10 20 50
    Equivalent mass(kg) 0.5 1.7 5 5 10
    Fall height(mm) 400 300 200 400 500

    Degrees of protection against external mechanical impacts

    IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
    0.14J 0.2J 0.35J 0.5J 0.7J 1J 2J 5J 10J 20J


    2. Relative products